BBS COMMANDS

This is the list of commands you see when you use the BBS.

A bort- This command is used to stop actions pending. It is not an immediate         process.

B ye command. Used to quit the BBS connection and return to your system.

C onnect command. Used to connect to either a node or a BBS.

D irectory. Used to access the BBS system files. All commands are basic DOS          commands. Here you can download/upload files using YAPP. On W8IOU         (Club BBS) there are extensive files with lots of info.

E dit command. Allows for editing of text.

F Used in conjunction with the D command to return to BBS commands.

G ateway command. (The BBS must be a gateway for this command to be active).

H elp command. (You may also use a question mark ?).

I Information about the system. (Location, Grid Square, etc).

J Lists the last few stations that have connected.

K Kill messages.

            K> (Callsign) will kill messages to that callsign (SysOp only)

            K< (Callsign) will kill messages from that callsign (SysOp only)

            K # will kill the message you have just read, IF it was addressed to you.

            KM will kill all read messages to you. PLEASE kill messages you have read.

L Lists ALL messages on the board. Careful, this could take a while. We usually                  have 4-5 HUNDRED messages.

            L> (Call) lists messages to that callsign (SysOp only)

            L< (Call) lists messages from that callsign (SysOp only)

            LM (List Mine) Lists messages to connected station

            LS (Subject) lists messages with that subject in the title line

M Make copy of a message to a file.

            M 12345 c:\(folder) will make a copy of the message in that directory.

            MV 12345 c;\(folder) will make a copy but WILL INCLUDE headers.

O Options: Language, paging, etc

            OL Allows selection of Languages available. Be careful with this one.

            OP nn Gives you the option of having a set number of pages displayed.                    This is very helpful if you don't have scroll capability. I would                      recommend that not more than 20 pages be selected. This will allow                   for housekeeping lines.

R Read

            R (msg#) reads message number listed. Cannot be a personal message that              is not addressed to you.

            RM reads messages directed to console callsign

            R> (call) reads messages to that call (SysOp only)

            R< (call) reads messages from that call (SysOp only)

S send a message

            S (CALL) will send a message to that callsign. It will NOT be forwarded.

            SP send personal message addressed to another Ham

                        SP K3MI@K3MI.#SWPA.PA USA.NOAM is full address

                        SP K3MI without full address will work if K3MI is in the White                        Pages. If not in the WP  the message will not be forwarded.

            SB (send bulletin) will send bull only to the BBS where originated

            SB @WWW will send bull World Wide

            SB @EU will send bull to European BBS's only

            SB @ALLUSA will direct the bull to ALL BBS's nationwide.

            SB @ALLPA will direct message to Penna BBS's only.

            SB SALE @swpa would send a bulletin selling something to all SWPA BBS's

                        Be careful when sending bulls. Know your target area. Selling a                    100' tower in California would not be a good idea. (Shipping costs?)

                        NOTE: Your message WILL be held for review by the SysOp. This is               to protect the license of the BBS owner.

T Talk to SysOp This will send a series of dings to the SysOp. If available he will answer your page and you can go keyboard to keyboard.

V 12345 (Verbose). Reads the message and shows all headers.

X Toggles between expert and normal mode. In Expert mode sign on information is not sent. (The list of commands a-z, etc).

! Short version of the Info command

            Further information on these and other commands can be obtained by         typing ? or H (command).

These additional commands are available with TERMLG

NOTE: For each of these commands, ESC will release the function and return to normal screen.

ALT A  will display a list of the Text Key values and first 60 characters of each        script. This is used to identify the values stored.

ALT B puts you into the scroll feature of TERMLG. Using either up/down     arrows or page up/page down will scroll thru the message. B will release          the scroll feature. In this mode, you can print, save to a file, or send to           radio port,

ALT C will clear the screen.

ALT E allows edits of the Text keys and the texts are sent at the start and end of    outside connects. All the normal edit commands are available in this mode.

ALT F key enter edt mode using a copy of the buffer. In this mode there is   complete editing available for a copy of the receive buffer. The text may be        deleted, moved, edited and augmented from a file. Parts of the text may be         printed, saved to a file, or sent to the radio port. The changes to this copy   of the receive buffer are NOT saved back to the buffer--it is not altered.

ALT H enters a "help" mode where there are several choices of help screens. The    user may pick one of several additional help screen topics.

                                    HELP SCREEN SELECTION MENU

                                    A- General help for function keys

                                    B- General help for edit functions

                                    C- Script edit help information

                                    D- Text Screen edit information

                                    E- Startup command line information

                                    F- File send/receive help information

ALT J displays a heard list. This list is maintained using the monitor channel.

ALT K writes the current TERMLG configuration to the TERMLG.CFG file. This        function is used after there has been an edit of one or more of the texts or    passwords. If a change has been made and not saved with an ALT-K            function the user will be prompted at exit to save changes.

ALT M toggles the monitor on/off mode. When the monitor is on, the frames         received that match the port mask (ALT P function) will be displayed on the       screen. The state of the monitor is shown on the status line at the bottom     of the screen.

ALT P prompts the user to set the monitor port mask. This is a number that            represents a bit map of the ports. A one bit in a position allows monitoring      of the port. A value of 255 is the default allowing all ports to be seen.

ALT Q disconnects the current channel and returns the user to the switch. This      may be used at any time to force a disconnect.

ALT R enters file receiver mode. Fikes may be received as an ASCII file (capture      mode) or in a YAPP or YAPPZIP protocol. More details on the use of file           receive will be presented later.

ALT S enters the file send mode. Files may be sent as an ASCII fle or using YAPP    or YAPPZIP protocol. more details on the use of file send will be presented    later.

ALT T toggles an on screen clock that appears in the upper left side of the screen.

ALT U is used to write the entire receive buffer to a file. The user is prompted for             the name and path for the file save.If no path is given then the path to TERMLG is used unless it has been changed by the /P load option.

ALT V puts TERMLG in a mode to receive connects from the outside. In normal       operation connects to this G8BPQ application are not allowed. This key                toggles "CONOK" on/off There are several restrictions that must be                                                         observed. Connects from outside are allowed on strean A only and strean A                                                      and B must be in the disconnect state.

ALT W allows send or  1 thru 5 edit of passwords. The user is given the option of   sending password 1 through 5 by entering 1 to 5 or editing password 1           through 5 by entering A to E. When sending a password the line just                                                              received (last line added to the buffer) is parsed to get the number for the                                                        characters to be pulled from the password. If a password is changed it may                                                    be saved to the TERMLG.CFG file by using the ALT-K function.

ALT X is used t exit TERNLG. The user will be prompted to save changes to   configuration if any has been made. Any open connections will be                                      disconnected and the G8BPQ channels used by TERMLG will be released.                                                         The user is given the option to exit or not exit.

ALT Y is used to set the screen colors. The change of color screen will show the     colors in use and give a selection of colors.

ALT Z is used to toggle between streams A and B. The program allows two independent connects at one time. The current stream is shown on the                            status line at the bottom of the screen. The information received from the                                               two streams is shown in different colors.

F1 to F10 keys send the text key value associated with that key to the radio port   on the selected stream.

SHIFT F1 to SHIFT F10 "runs" scripts 1 to 10. The script may be aborted by the       ESC key.

CONTROL F1 to CONTROL F10 allows editing of scripts 1 to 10.

ESC is used to abort scripts, abort YAPP transfers, and many other functions.